Sentry LT200 Manuel Page 16

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 38
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 15
MultiPoint Level Control System
12
E 2001 Nordson Corporation
All rights reserved
321 351A
Issued 7/01
69LVLEHIS01
The level control process starts when a low voltage, high frequency
signal is sensed and sent to the capacitance MultiCap Probe then to the
ground plane. The control relay is calibrated to ignore this signal unless
hot material contacts the MultiCap Probe. If hot melt material contacts the
MultiCap Probe, additional current flows to the ground, is sensed, and
amplified by the control relay. Internal circuitry reads this amplified signal
and regulates the filling process.
6901004A
FEED UNIT
LEVEL
CONTROL
BOX
APPLICATOR
UNIT
FEED GUN (OPTIONAL)
LEVEL PROBE
FEED HOSE
APPLICATOR HOSE
APPLICATOR GUN
ADHESIVE DISPENSED ON
CUSTOMER SUBSTRATE
Fig. 2 System Flow
The MultiPoint Level Control System consists of the following
components.
S Control Box
S RIA 450 Controller
S MultiCap Probe
S Lid Kit
How the System Works
System Components
Vue de la page 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 37 38

Commentaires sur ces manuels

Pas de commentaire